Subscribe / Unsubscribe Enewsletters | Login | Register

Pencil Banner

HP touts greater capacity of new 11n Wi-Fi access points

John Cox | March 1, 2011
Hewlett-Packard's new 802.11n Wi-Fi access points include two models that support three data streams, capable of yielding a data rate of 450Mbps per radio, or 900Mbps per access point. That translates into greater throughput, sustained over longer distances, compared with products that use two data streams.

FRAMINGHAM 1 MARCH 2011 - Hewlett-Packard's new 802.11n Wi-Fi access points include two models that support three data streams, capable of yielding a data rate of 450Mbps per radio, or 900Mbps per access point. That translates into greater throughput, sustained over longer distances, compared with products that use two data streams.

HP says the high end of the new line can handle up to 50% more Wi-Fi clients or 50% greater bandwidth than 11n products with two data streams. All three of the new 400 series models, each with two radios, are aimed at the enterprise market. One is an entry-level 11n access point, with two data streams; the other two, both with three streams, differ only in their antenna configuration: One is built-in under the covers, the other has exterior fittings to mount directional antennas for greater range.

The new access points also activate a range of optional radio management features in the 802.11n standard. Together, these let the access point and client exchange more information about the RF environment, and let the access point make a range of adjustments for a stronger, better-quality connection for each client.

As part of the new product rollout, HP also announced updated firmware, version 5.5, for its Multi Service Mobility (MSM) controller, and the 3.10 version of the Mobility Manager network management application.

The 802.11n standard separates the data stream into substreams, each corresponding to a separate transmit and receive antenna pairing between the client and the access point. More streams, and antenna pairs, means a greater data rate, and a greater resulting throughput; along with being able to sustain that throughput over longer distances. HP is using the latest 3x3 and 2x2 chips from Atheros for the new products.

The result is a Wi-Fi network that's more reliable, and creates better quality connections for more clients, even if the 11n clients only have two or even one antenna.

And that's been the experience of one beta site for the new HP 400 series: Glendale Community College, with three campuses in Glendale, Ariz., about 11 miles northwest of Phoenix. All three sites have been using older HP WLAN gear since 2008, 98 all told. They are a mix of 802.11abg, with newer 11n products installed in some high-traffic areas. The 11n devices exploit Gigabit Ethernet back to the LAN. The two remote locations use metro Ethernet WAN service back to the data center on the main campus.

 

1  2  3  Next Page 

Sign up for Computerworld eNewsletters.