Netgear's ReadyNAS appliances may be the most polished entry-level NAS products on the market. Now Netgear has set out to redefine this category of storage products with the ReadyData series. The new definition combines a variety of drive types plus innovative software to handle a wide range of storage tasks. The key here is flexibility. The ReadyData 5200 — a 12-bay, 2U rack-mount system — provides the building blocks you need to configure a storage system tailored to meet specific application profiles.
Many basics are assumed in a small to midrange enterprise storage system, including 10GbE networking, redundant power supplies, and support for SATA, SAS, and SSDs (solid-state drives). The ReadyData 5200 has all that covered and more. In addition to the hardware flexibility, the ReadyData delivers software features for both block (using iSCSI) and file (NFS and SMB) storage options to meet any need. Couple that with thin provisioning, data compression, and deduplication, and you have the kinds of features normally seen only on high-end products.
A number of innovative features are used by the ReadyData to improve performance. If you have SSDs installed, you can configure them for either "Read Boost" or "Write Boost." Thus, you can use SSDs as a read cache or a write cache in front of rotating SATA or SAS disk drives to improve overall performance.
The system I reviewed came configured with a total of 10 SATA drives, plus one read-optimized SSD and one write-optimized SSD. Data management features of the ReadyData unit include the ability to take an unlimited number of block-level snapshots. The administrative interface for restoring a snapshot displays a timeline where you can choose to restore from any point in time. This feature could really come in handy when users have the "it was there yesterday" missing file problem. For saving space there is both compression and data deduplication. These features must be enabled for each volume and will affect performance.
Virtual networking is another key feature in the ReadyData box, allowing you to create multiple virtual network connections to any of the physical ports. This becomes really useful when you want to enable off-site data replication and use a different IP address for this function. It also helps when you need to provide a large number of iSCSI LUNS and you want to separate the traffic.
At $18,850 full retail, the ReadyData 5200 reviewed here costs more than twice the price of the 12-bay ReadyNAS 4220 I reviewed last month. If all you need is a backup target, or enough oomph to support light file sharing, the ReadyNAS will do the job for much less. For heavier duties — such as a back end for virtual servers or database-driven apps — the ReadyData delivers significant performance advantages, as well as advanced features the ReadyNAS can't match.
Sign up for Computerworld eNewsletters.